- Home
- Networking
- Extreme
- Wireless Access Points
- Controllers
- WiNG AP 7612 Wall Plate
Details:
Description
| Product Fatures | AP 7612 |
|---|---|
| 802.11ac Capabilities | |
| Capabilities | 802.11ac 2x2:2, MIMO, MU-MIMO 256-QAM, HT20/40/80 MHz, BLE Packet Aggregation (AMSDU, AMPDU) RIFS, STBC, LDPC MIMO Power Save; 802.11ac Tx beamform; MRC |
| Physical Characteristics | |
| Dimensions | 6.1" x 4.4" x 1.2", 155mm x 112mm x 30mm |
| Weight | 0.6 lbs/0.27kg |
| Housing | ABS Plastic, Aluminum Backplate |
| Available Mounting | Included Wall Mount Bracket |
| LEDs Activity Indication | 3 Side-Mounted LEDs; Radio 1, Radio 2, BLE |
| LAN Ethernet | 2x IEEE 802.3 Gigabit Ethernet Auto-Sensing. PoE-Out on GE2 |
| Antenna | 2.4 GHz Band; 5.4dBi; 5GHz Band, 8.5dBi |
| Console Port | Not User Accessible |
| User Environment | |
| Operating Temperature | 32° F to 104° F/ 0° C to 40° C |
| Storage Temperature | -40°F to 158°F/-40°C to 70°C |
| Operating Humidity | 0% - 95% (noncondensing) |
| Electrostatic Discharge | 8kV Air, 6kV Contact |
| Power Specifications | |
| Operating Voltage | PoE-PD Spec: 48VDC; Wall Brick: 12VDC |
| Operating Current | PoE-PD Spec: 200 mA at 48V typical (9.6W); (w/o PoE daisy chain) : Wall Brick: 1.5a |
| PoE-PD class | 802.3af, 802.3at |
| PoE-out | 802.3af When the Input Power is 802.3at. PoE-Out is Only Available When the Input Power is PoE |
| Networking Specification | |
| Layer 2 and Layer 3 | Layer 3 Routing, 802.1q, DynDNS, DHCP Server / Cient, BOOTP Client, PPPoE, and LLDP |
| Security | Stateful Firewall, IP filtering, NAT, 802.1x, 802.11i, WPA2, WPA TripleMethodology Rogue Detection: 24x7 dual-band WIPS sensing, on-board IDS, and secure guest access (hotspot) with captive portal, IPSec, and RADIUS Server |
| Quality of Service (QoS) | WMM, WMM-UAPSD, 802.1p, Diffserv, and TOS |
| Radio Specifications | |
| Wireless Medium | Direct Sequence Spread Spectrum (DSSS), Orthogonal Frequency Division Multiplexing (OFDM), and Spatial Multiplexing (MIMO) |
| Network Standards | IEEE 802.11a/b/g/n/ac, 802.11d and 802.11i WPA2, WMM, and WMM-UAPSD, L2TPv3, Client VPN, MESH (released in a future version of WiNG), Captive Portal server, Support SNMP v1, v2c, v3 |
| Data Rates Supported | 802.11b/g: 1,2,5.5,11,6,9,12,18,24,36,48 and 54 Mbps; 802.11a: 6,9,12,18,24,36,48, and 54 Mbps; 802.11n: MCS 0-15 up to 300 Mbps; 802.11ac on 2G VHT MCS0-9 up to 400Mbps, 802.11ac on 5G: VHT MCS 0-9 up to 866.7 Mbps |
| Operating Channels | 2.4 GHz Band: Channel 1 through Channel 13 5 GHz Band: Channel 36 through Channel 165 * Channel availability depends on local regulatory restrictions |
| Antenna Configuration | 2x2 MIMO (transmit/receive on both antennas). Transmit Power Adjustment 1dB Increment |
| Operating Frequencies | 2412 to 2472 MHz, 5180 to 5825 MHz |
| Certifications | |
| Wi-Fi Alliance (WFA) | 802.11a/b/g/n/ac |
| Bluetooth | Bluetooth SIG listed |
| Regulatory | |
| Product Safety Certifications | FCC CFR 47 Part 15, Class B, ICES-003 Class B, FCC Subpart C 15.247, FCC Subpart E 15.407, RSS247, EN 301 893, EN 300 328, EN 301 489 1 & 17, EN 50385, EN 55032 (CISPR 32), EN 60601-1-2, AS/ NZS4268 + CISPR32 |
| Radio Approvals | FCC CFR 47 Part 15, Class B, ICES-003 Class B, FCC Subpart C 15.247, FCC Subpart E 15.407, RSS247, EN 301 893, EN 300 328, EN 301 489 1 & 17, EN 50385, EN 55032 (CISPR 32), EN 60601-1-2, AS/ NZS4268 + CISPR32 |
| Maximum Conducted Transmit Power | |
| AP-7612-680B30 | 2.4 GHz Band: 20 dBm; BLE: 7 dBm 5 GHz Band: 20 dBm |
CONTACT US TO LEARN MORE
ABOUT WiNG AP 7612 Wall Plate
Fill out the form and our team will get back to you.
- phone1-855-432-8918
- mail[email protected]
-
location
2130 W Sam Houston Pkwy N
Houston, TX 77043







