- Home
- Networking
- Cisco
- Wireless
- Indoor & Controllerless Access Points
- Catalyst 9130
Details:
Description
|
Item |
Specification |
||||||||||||
|
Part numbers |
Cisco Catalyst 9130AXI Access Point: Indoor environments, with internal antennas
● C9130AXI-x: Cisco Catalyst 9130AX Series
● C9130AXI-EWC-x: Cisco Catalyst 9130AX Series with Embedded Wireless Controller
Cisco Catalyst 9130AXE Access Point: Challenging indoor environments, with external antennas
● C9130AXE-x: Cisco Catalyst 9130AX Series
● C9130AXE-EWC-x: Cisco Catalyst 9130AX Series with Embedded Wireless Controller
Cisco Catalyst 9130AXE-STA Access Point: C9130 AP with C-ANT9104 Stadium antenna
● C9130AXE-STA-x: Cisco Catalyst 9130AX Series
Regulatory domains: (x = regulatory domain) Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance. Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List and/or regional price lists. Cisco Wireless LAN Services
● AS-WLAN-CNSLT: Cisco Wireless LAN Network Planning and Design Service
● AS-WLAN-CNSLT: Cisco Wireless LAN 802.11n Migration Service
● AS-WLAN-CNSLT: Cisco Wireless LAN Performance and Security Assessment Service
|
||||||||||||
|
Software |
Catalyst 9130AXI
● Cisco Unified Wireless Network Software Release 8.10.x or later
● Cisco IOS XE Software Release 16.12.1 with AP Device Pack, or later
Catalyst 9130AXE
● Cisco Unified Wireless Network Software Release 8.10 MR1 or later
● Cisco IOS XE Software Release 17.1.1 or later
Cisco Catalyst 9130AXE Stadium Antenna Access Point, external antenna (C-ANT9104)
● Cisco IOS XE Software Release 17.6.1 or later
|
||||||||||||
|
Supported wireless LAN controllers |
● Cisco Catalyst 9800 Series Wireless Controllers
● Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller
Note: C9130AXE-STA-x is not supported on AireOS controllers
|
||||||||||||
|
802.11n version 2.0 (and related) capabilities |
● 4x4 MIMO with four spatial streams
● Maximal Ratio Combining (MRC)
● 802.11n and 802.11a/g
● 20- and 40-MHz channels
● PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
● 802.11 Dynamic Frequency Selection (DFS)
● Cyclic Shift Diversity (CSD) support
|
||||||||||||
|
802.11ac |
● 8x8 downlink MU-MIMO with eight spatial streams
● MRC
● 802.11ac beamforming
● 20-, 40-, 80-, and 160-MHz channels
● PHY data rates up to 3.4 Gbps (8x8 80 MHz or Dual 4x4 80+80 MHz on 5GHz)
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● 802.11 DFS
● CSD support
● Wi-Fi Protected Access (WPA) 3 support
|
||||||||||||
|
802.11ax |
● 8x8 uplink/downlink MU-MIMO with eight spatial streams
● Uplink/downlink OFDMA
● TWT
● BSS coloring
● MRC
● 802.11ax beamforming
● 20-, 40-, 80-, and 160-MHz channels
● PHY data rates up to 5.38 Gbps (8x8 80 MHz or Dual 4x4 80+80 MHz on 5GHz and 4x4 20 MHz on 2.4)
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● 802.11 DFS
● CSD support
● WPA3 support
|
||||||||||||
|
Integrated antenna |
● 2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
● 5 GHz: Peak gain 6 dBi, internal antenna, omnidirectional in azimuth
|
||||||||||||
|
External antenna with smart antenna connector |
● The Cisco Catalyst 9130AXE Access Point is certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz)
● Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios
● Supports Self-Identifiable Antennas (SIA) on the smart antenna connector
● Smart antenna connector is a compact multi-RF connector with 8-DART interface
● Requires the AIR-CAB002-D8-R= 2 ft smart antenna connector when used with antennas with a RP-TNC connector
● Requires the AIR-CAB003-D8-N= 3 ft smart antenna connector when used with AIR-ANT2513P4M-N= antenna
● For more details, see the Catalyst 9130AX Series Getting Started Guide.
● For more details on C9130AXE-STA, see C-ANT9104 Hardware Installation Guide
|
||||||||||||
|
Interfaces |
● 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45)
● Management console port (RJ-45)
● USB 2.0 at 4.5W
|
||||||||||||
|
Indicators |
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
|
||||||||||||
|
● Access point (without mounting brackets):
◦ C9130AXI: 8.9 x 8.9 x 1.88 in. (22.6 x 22.6 x 4.8 cm) ◦ C9130AXE: 9.17 x 9.17 x 1.58 in. (23.3 x 23.3 x 4.0 cm) ◦ C9130AXE-STA: 18.2 X 23.5 X 5.8 in. (59.70 X 46.23 X 14.8 cm) |
|||||||||||||
|
Weight |
Cisco Catalyst 9130AXI
● 3.2 lb. (1.45 kg)
Cisco Catalyst 9130AXE
● 3.78 lb. (1.71 kg)
Cisco Catalyst 9130AXE-STA
● 15.5 lbs (7.03 Kg)
|
||||||||||||
|
Input power requirements |
● 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE)
● Cisco power injector, AIR-PWRINJ6=
● 802.3af PoE
● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)
|
||||||||||||
|
|
Catalyst 9130AXI |
||||||||||||
|
Power source |
2.4-GHz radio |
5-GHz radio |
Link speed |
USB |
Max PoW Power Consumption |
||||||||
|
802.3at (PoE+) |
4x4 |
8x8 |
5G |
N |
25.5W |
||||||||
|
802.3at (PoE+) |
4x4 |
4x4 |
5G |
Y [4.5W] |
25.5W |
||||||||
|
802.3bt (Cisco UPOE) |
4x4 |
8x8 |
5G |
Y [4.5W] |
30.5W |
||||||||
|
Cisco Catalyst 9130AXE |
|||||||||||||
|
Power source |
2.4-GHz radio |
5-GHz radio |
Link speed |
USB |
Max PoE Power Consumption |
||||||||
|
802.3at (PoE+) |
4x4 |
8x8 |
5G |
N |
25.5W |
||||||||
|
802.3at (PoE+) |
4x4 |
4x4 |
5G |
Y [4.5W] |
25.5W |
||||||||
|
802.3bt (Cisco UPOE) |
4x4 |
8x8 |
5G |
Y [4.5W] |
30.5W |
||||||||
|
Cisco Catalyst 9130AXI and 9130AXE |
|||||||||||||
|
Power source |
2.4-GHz radio |
5-GHz radio |
Link speed |
USB |
Max PoE Power Consumption |
||||||||
|
802.3af |
PoE |
1x1 |
1x1 |
1G |
N |
13.4W |
|||||||
|
Note: Actual power consumption may very depending on AP usage. It is recommended that you ensure that LLDP/CDP is enabled to allow proper power negotiation. |
|||||||||||||
|
Environmental |
Cisco Catalyst 9130AXI
● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
● Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m)
● Operating temperature: 32° to 122°F (0° to 50°C)
● Operating humidity: 10% to 90% (noncondensing)
● Operating altitude test: 40˚C, 9843 ft (3000 m)
Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 8x8 to 4x4 on the 5 GHz radio, uplink Ethernet will downgrade to 1 Gigabit Ethernet; however, the USB interface will remain enabled. Cisco Catalyst 9130AXE
● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
● Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m)
● Operating temperature: -4° to 122°F (-20° to 50°C)
● Operating humidity: 10% to 90% (noncondensing)
● Operating altitude test: 40˚C, 9843 ft.(3000 m)
|
||||||||||||
|
System memory |
● 2048 MB DRAM
● 1024 MB flash
|
||||||||||||
|
Warranty |
Limited lifetime hardware warranty |
||||||||||||
|
Available transmit power settings |
2.4 GHz
● 23 dBm (200 mW)
● -4 dBm(0.39 mW)
|
5 GHz
● 26 dBm (400 mW)
● -1 dBm (0.79 mW)
|
|||||||||||
|
Regulatory domains |
Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance. For information about regulatory domain support, refer to the Cisco Regulatory Domain White Paper. |
||||||||||||
|
Compliance standards |
●
Safety:
◦ IEC 60950-1 ◦ EN 60950-1 ◦ UL 60950-1 ◦ CAN/CSA-C22.2 No. 60950-1 ◦ AS/NZS60950.1 ◦ UL 2043 ◦ Class III equipment
●
Emissions:
◦ CISPR 32 (rev. 2015) ◦ EN 55032 (rev. 2012/AC:2013) ◦ EN 55032 (rev. 2015) ◦ EN61000-3-2 (rev. 2014) ◦ EN61000-3-3 (rev. 2013) ◦ KN61000-3-2 ◦ KN61000-3-3 ◦ AS/NZS CISPR 32 Class B (rev. 2015) ◦ 47 CFR FCC Part 15B ◦ ICES-003 (rev. 2016 Issue 6, Class B) ◦ VCCI-CISPR 32 ◦ CNS (rev. 13438) ◦ KN-32 ◦ QCVN 118:2018/BTTTT
●
Immunity:
◦ CISPR 24 (rev. 2010) ◦ EN 55024 + AMD 1(rev. 2010) ◦ EN 55035: 2017 ◦ KN35
●
Emissions and immunity:
◦ EN 301 489-1 (v2.1.1 2017-02) ◦ EN 301 489-17 (v3.1.1 2017-02) ◦ QCVN (18:2014) ◦ QCVN 112:2017/BTTTT ◦ KN 489-1 ◦ KN 489-17 ◦ EN 60601-1-2:2015 ◦ EN 61000-6-1: 2007 |
●
Radio:
◦ EN 300 328 (v2.1.1) ◦ EN 301 893 (v2.1.1) ◦ AS/NZS 4268 (rev. 2017) ◦ 47 CFR FCC Part 15C, 15.247, 15.407 ◦ RSP-100 ◦ RSS-GEN ◦ RSS-247 ◦ China regulations SRRC ◦ LP0002 (rev 2018.1.10) ◦ Japan Std. 33a, Std. 66, and Std. 71
●
RF safety:
◦ EN 50385 (rev. Aug 2002) ◦ ARPANSA ◦ AS/NZS 2772 (rev. 2016) ◦ EN 62209-1 (rev. 2016) ◦ EN 62209-2 (rev. 2010) ◦ 47 CFR Part 1.1310 and 2.1091 ◦ RSS-102
●
IEEE standards:
◦ IEEE 802.3 ◦ IEEE 802.3ab ◦ IEEE 802.3af/at ◦ IEEE 802.11a/b/g/n/ac/ax ◦ IEEE 802.11h, 802.11d
●
Security:
◦ 802.11i, (WPA2, WPA3 ◦ 802.1X ◦ Advanced Encryption Standard (AES)
●
Extensible Authentication Protocol (EAP) types:
◦ EAP-Transport Layer Security (TLS) ◦ EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2 ◦ Protected EAP (PEAP) v0 or EAP-MSCHAP v2 ◦ EAP-Flexible Authentication via Secure Tunneling (EAP-FAST) ◦ PEAP v1 or EAP-Generic Token Card (GTC) ◦ EAP-Subscriber Identity Module (SIM) |
|||||||||||
|
Data rate, transmit power, receive sensitivity |
For more detailed information about data rate, transmit power, and receive sensitivity, please refer to the Cisco RF details. |
||||||||||||
|
Transmit (Tx) power and receive (Rx) sensitivity |
|||||||||||||
|
|
|
|
5-GHz primary radio |
5-GHz secondary radio |
2.4-GHz radio |
||||||||
|
|
Spatial streams |
Number of active antennas |
Total Tx power (dBm) |
Rx sensitivity (dBm) |
Total Tx power (dBm) |
Rx sensitivity (dBm) |
Total Tx power (dBm) |
Rx sensitivity (dBm) |
|||||
|
802.11/11b |
|||||||||||||
|
1 Mbps |
1 |
4 |
– |
– |
– |
– |
23 |
-104 |
|||||
|
11 Mbps |
1 |
4 |
– |
– |
– |
– |
23 |
-96 |
|||||
|
802.11a/g |
|||||||||||||
|
6 Mbps |
1 |
4 |
23 |
-100 |
23 |
-99 |
23 |
-98 |
|||||
|
24 Mbps |
1 |
4 |
22 |
-92 |
22 |
-92 |
22 |
-91 |
|||||
|
54 Mbps |
1 |
4 |
21 |
-84 |
21 |
-83 |
20 |
-82 |
|||||
|
802.11n HT20 |
|||||||||||||
|
MCS0 |
1 |
4 |
23 |
-99 |
23 |
-99 |
23 |
-98 |
|||||
|
MCS31 |
4 |
4 |
20 |
-77 |
20 |
-77 |
20 |
-75 |
|||||
|
802.11n HT40 |
|||||||||||||
|
MCS0 |
1 |
4 |
23 |
-96 |
23 |
-96 |
– |
– |
|||||
|
MCS31 |
4 |
4 |
20 |
-75 |
20 |
-75 |
– |
– |
|||||
|
802.11ac VHT20 |
|||||||||||||
|
MCS0 |
1 |
4 |
23 |
-100 |
23 |
-99 |
– |
– |
|||||
|
MCS9 |
4 |
4 |
– |
– |
– |
– |
– |
– |
|||||
|
MCS0 |
1 |
8 |
26 |
-102 |
– |
– |
– |
||||||
|
MCS8 |
8 |
8 |
23 |
-73 |
– |
– |
– |
||||||
|
MCS9 |
8 |
8 |
– |
– |
– |
– |
– |
||||||
|
802.11ac VHT40 |
|||||||||||||
|
MCS0 |
1 |
4 |
23 |
-96 |
23 |
-96 |
– |
– |
|||||
|
MCS9 |
4 |
4 |
19 |
-69 |
19 |
-69 |
– |
– |
|||||
|
MCS0 |
1 |
8 |
26 |
-99 |
– |
– |
– |
||||||
|
MCS9 |
8 |
8 |
22 |
-69 |
– |
– |
– |
||||||
|
802.11ac VHT80 |
|||||||||||||
|
MCS0 |
1 |
4 |
23 |
-93 |
23 |
-93 |
– |
– |
|||||
|
MCS9 |
4 |
4 |
19 |
-65 |
19 |
-64 |
– |
– |
|||||
|
MCS0 |
1 |
8 |
26 |
-95 |
– |
– |
– |
||||||
|
MCS9 |
8 |
8 |
22 |
-65 |
– |
– |
– |
||||||
|
802.11ac VHT160 |
|||||||||||||
|
MCS0 |
1 |
4 |
26 |
-89 |
– |
– |
– |
||||||
|
MCS9 |
4 |
4 |
21 |
-61 |
– |
– |
– |
||||||
|
802.11ax HE20 |
|||||||||||||
|
MCS0 |
1 |
4 |
23 |
-99 |
23 |
-99 |
23 |
-98 |
|||||
|
MCS11 |
4 |
4 |
18 |
-66 |
18 |
-66 |
17 |
-65 |
|||||
|
MCS0 |
1 |
8 |
26 |
-102 |
– |
– |
– |
||||||
|
MCS11 |
8 |
8 |
21 |
-65 |
– |
– |
– |
||||||
|
802.11ax HE40 |
|||||||||||||
|
MCS0 |
1 |
4 |
23 |
-96 |
23 |
-96 |
– |
– |
|||||
|
MCS11 |
4 |
4 |
18 |
-63 |
18 |
-62 |
– |
– |
|||||
|
MCS0 |
1 |
8 |
26 |
-99 |
– |
– |
– |
||||||
|
MCS11 |
8 |
8 |
21 |
-63 |
– |
– |
– |
||||||
|
802.11ax HE80 |
|||||||||||||
|
MCS0 |
1 |
4 |
23 |
-93 |
23 |
-93 |
– |
– |
|||||
|
MCS11 |
4 |
4 |
17 |
-59 |
17 |
-59 |
– |
– |
|||||
|
MCS0 |
1 |
8 |
26 |
-96 |
– |
– |
– |
||||||
|
MCS11 |
8 |
8 |
20 |
-59 |
– |
– |
– |
||||||
|
802.11ax HE160 |
|||||||||||||
|
MCS0 |
1 |
4 |
26 |
-88 |
– |
– |
– |
||||||
|
MCS11 |
4 |
4 |
19 |
-56 |
– |
– |
– |
||||||
CONTACT US TO LEARN MORE
ABOUT Cisco Catalyst 9130
Fill out the form and our team will get back to you.
- phone1-855-432-8918
- mail[email protected]
-
location
2130 W Sam Houston Pkwy N
Houston, TX 77043







