Details:
Description
Category Specifications
Radios Management
  • 2.4 GHz 802.11b/g/n client access radio
  • 5 GHz 802.11a/n/ac client access radio
  • 2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio
  • 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support
  • Concurrent operation of all four radios
  • Supported frequency bands (country-specific restrictions apply):
    • 2.412-2.484 GHz
    • 5.150-5.250 GHz (UNII-1)
    • 5.250-5.350 GHz (UNII-2)
    • 5.470-5.600, 5.660-5.725 GHz (UNII-2e)
    • 5.725-5.825 GHz (UNII-3)
MR52 Specifications
  • Integrated omni-directional antennas (5.5 dBi gain @ 2.4 GHz, 6.2 dBi gain @ 5 GHz)
  • Individual antenna elements for each radio
  • 802.11ac Wave 2 and 802.11n capabilities
  • 4 x 4 multiple input, multiple output (MIMO) with four spatial streams
  • SU-MIMO and MU-MIMO support
  • Maximal ratio combining (MRC) & beamforming
  • 20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac)
  • Up to 256-QAM on both 2.4 GHz & 5 GHz bands
  • Packet aggregation
  • Cyclic Shift Diversity (CSD) for improved downlink wireless performance
  • Space-time block coding (STBC) for increased range and improved reception
  • Aggregate MAC Protocol Data Unit (A-MPDU) and Aggregate MAC Service Data Unit (A-MSDU) for frame aggregation
  • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
Power
  • Power over Ethernet: 37 - 57 V (802.3at required; functionality-restricted 802.3af mode supported)
  • Alternative 12 V DC input
  • Power consumption: 21W max (802.3at)
  • Power over Ethernet injector and DC adapter sold separately
Interfaces
  • 2x 10/100/1000 BASE-T Ethernet (RJ45)
  • 1x DC power connector (5.5 mm x 2.5 mm, center positive)
Mounting
  • All standard mounting hardware included
  • Desktop, ceiling, and wall mount capable
  • Ceiling tile rail (9/16, 15/16, or 1 ½” flush or recessed rails), assorted cable junction boxes
  • Bubble level on mounting cradle for accurate horizontal wall mounting
Physical Security
  • Two security screw options (included)
  • Kensington lock hard point
  • Concealed mount plate with anti-tamper cable bay
Environment
  • Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
  • Humidity: 5 to 95% non-condensing

CONTACT US TO LEARN MORE

ABOUT Meraki MR52

Fill out the form and our team will get back to you.

What are you looking for?